Polycom ip phone updating initial configuration Video couple sexchat

Posted by / 12-Dec-2017 17:36

Once the two user agents have negotiated a successful call setup, the media is transported via the RTP protocol and sent directly between the two user agents.

SIP proxies do not handle media; they simply deal with the SIP packets.

On the same screen, please note your Model as well.

In many cases, this information can also be found on the bottom of the phone albeit printed very small.

If it did not, please take the time to go back and review the steps, consult the wiki, engage the community, and get your system running.

Unfortunately, we cannot yet make any calls, because we have not yet created any channels.

While there are dozens of different channel types, and dozens of different ways to configure each type of channel, we just want to get some calls happening, so let’s try and keep things simple.

The reboot process may take up to 30 minutes on older phones, if a firmware upgrade is required.

The current version of software for most Sound Point IP phones on the boot server is 4.0.8c.

If we cover the basics of these channels, we will not have done an exhaustive survey of all channel types or topologies, but we will have created a base platform on which to develop your telecommunications system.

Further scenarios and channel configuration details can be found in Appendix D.

polycom ip phone updating initial configuration-67polycom ip phone updating initial configuration-47polycom ip phone updating initial configuration-73

So when our softphone dials an extension number, the call is set up between the softphone and Asterisk directly.

One thought on “polycom ip phone updating initial configuration”